6.6
DVD Player
Use an HDMI cable to connect the DVD player to the
TV.
If the DVD player is connected with HDMI and has
EasyLink CEC, you can operate the player with the TV
remote control.
For more information on EasyLink, in Help, press the
colour key Keywords and look up EasyLink
HDMI CEC.
Y Pb Pr - Component Video is a high quality
connection.
The YPbPr connection can be used for High Definition
(HD) TV signals.
6.7
Bluetooth
What You Need
You can connect a wireless device with Bluetooth® to
this TV – a wireless speaker or headphones. You can
also connect a wireless gamepad with Bluetooth LE.
To play the TV sound on a wireless speaker, you must
pair the wireless speaker with the TV. The TV can only
play the sound on one speaker at a time.
Attention - Audio to Video syncronisation
Many Bluetooth speaker systems have a high, so
called, 'latency'. High latency means that the audio
lags behind the video, causing unsynchronised 'lip
sync'. Before you purchase a wireless Bluetooth
speaker system, inform yourself about the newest
models and look for a device with a low latency
rating. Ask your dealer for advice.
Pairing a Device
Read the user manual of the device for specific
information on pairing and on wireless range. Make
sure the Bluetooth setting on TV is switched on.
Once a wireless gamepad is paired, you can use it.
When a device is paired, you do not need to pair it
again unless you remove the device.
To pair a bluetooth device with the TV…
1 - Switch on the bluetooth device and place it within
range of the TV.
2 - Press , select All Settings and press OK.
3 - Select Wireless and Networks and
press (right) to enter the menu.
4 - Select Bluetooth > Search Bluetooth Device,
and press OK.
5 - Select Start and press OK. Follow the
instuctions on screen. You will pair the device with the
TV and the TV will store the connection. You might
need to unpair a paired device first if the maximum
number of paired devices was reached.
6 - Select the type of device and press OK.
7 - Press (left) repeatedly if necessary, to close
the menu.
* Your TV doesn't support Bluetooth
subwoofer/speakers/headphones.
** HDMI connection is required for sound bar, speaker
and other audio device.
Select a Device
To select a wireless device…
1 - Press , select All Settings and press OK.
2 - Select Wireless and Networks and press OK.
3 - Select Bluetooth > Search for a device and
press OK.
4 - In the list, select the wireless device and
press OK.
5 - Press (left) repeatedly if necessary, to close
the menu.
Remove a Device
You can connect or disconnect a wireless Bluetooth
device. You can also remove a wireless Bluetooth
device. If you remove a Bluetooth device, the device
will be unpaired.
To remove or disconnect a wireless device…
1 - Press , select All Settings and press OK.
2 - Select Wireless and Networks and press OK.
3 - Select Bluetooth > Remove Bluetooth
device and press OK.
4 - In the list, select the wireless device and
27
To Next Page
Loading...
Need help?
General
Weight and Dimensions
