EasyManua.ls Logo

Philips AC3420/10 - Cleaning the Water Tank; Cleaning the Particle Sensor

Philips AC3420/10
829 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
English
Cleaning the water tank
1 Clean the water tank every week to keep it hygienic.
2 Take out the humidification filter.
3 Fill the water tank with water.
4 Add some mild washing-up liquid mixed with water in the water tank.
5 Clean the inside of the water tank with a soft clean cloth.
6 Empty the water tank into a sink.
7 Put the humidification filter back into the water tank.
Cleaning the particle sensor
Clean the particle sensor every 2 months for optimal functioning of the
appliance.
If the appliance is used in a dusty environment, it may need to be cleaned more
often.
If the humidity level in the room is very high, condensation may develop on the
particle sensor and the air quality light may indicate a more poor air quality even
though the air quality is actually good. If this occurs, clean the particle sensor.
2
1
1 Switch off the appliance and unplug from the power socket.
2 Open the air quality sensor cover.
3 Clean the particle sensor with a damp cotton swab.

Table of Contents

Related product manuals