………………………………………………………………………………………………………………………………
…………………………
SERVICE DOCUMENTATION
DISC CHANGER AG1000
1952
...........................................................................................................
This changer is suitable for:
1. Normal on mini-groove slats.
2. Plate [record]diameters of 12 "(30 cm) and 10" (25 cm) of mixed, and 7 "(17,5 cm)
3. Three speeds: 78, 45 and 33 1/3 rpm.
4. Frequencies 40, 50 and 60 Hz, can be changed by an install of pulley on the motor .
3 stepped motor pullies /3 diff p/n FOR 3 DIFF FREQUENCIES 40hz/50hz/60hz
5. Mains voltages on the 110 V on 220 V can be switched by voltage wiring change on the motor.
3
To Next Page
Loading...
