- 18 -
8 At about the half-way point, the pole will no longer slide down
through the mount and needs to be locked into position�
Using the dots on the pole and clamp, align the pole into position, and
rotate it 45° clock-wise to lock it into place.
9 The bottom of the pole is telescopic, so you can extend it down to the
oor.
Make sure to place the power cord in one of the slots provided at the
end of the tube towards a power outlet�
1
2
10 Run the cord where the oor and wall meet.
Using the provided power adapter, attach the cord from the pole and
plug it into a power outlet�
1
2
11 Attach the Baby Unit to its cradle by aligning the pegs in the craddle to
the holes at the bottom of the Baby Unit and pushing down�
12 Slide the Baby Unit forward to lock it into place and connect the USB-C
power cable into the back of the Baby Unit�
To Next Page