Philips AVENT SCD973 - Page 23

- 23 -
--.-
o
FVideo
?
Note: It takes about 15 seconds to establish the link between the
Parent Unit and the Baby Unit�
Make sure that the Baby Unit is switched on. When theBaby Unit is
switched o, the display of the Parent Unit will show the out of range
image�
If no connection has been established, the link light turns red, the
Parent Unit alert will sound about every 25 seconds and the out of
range image appears on the display�
<400m / 1312 feet
<50m / 164 feet
The operating range is up to 50meters / 164 feet indoors and
400meters/ 1312 feet outdoors. The operating range of the baby
monitor varies depending on the surroundings and factors that cause
interference� Wet and moist materials cause so much interference that the
range loss is up to 100%.
Dry materials Material thickness Loss of range
Wood, plaster, cardboard, glass (without metal,
wires or lead)
< 30cm (12 in) 0-10%
Brick, plywood < 30cm (12 in) 5-35%
Reinforced concrete < 30cm (12 in) 30-100%
Metal grills or bars < 1cm (0.4 in) 90-100%
Metal or aluminium sheets < 1cm (0.4 in) 100%