Philips BDL3215E - Advanced Option Settings; Input Resolution and Gamma Selection; Scan Mode, Conversion, and Film Mode

User Manual BDL3215E / BDL4225E
36
Main-Menu
ADVANCED OPTION
Ê INPUT RESOLUTION
* : INPUT VGA only
Manually selects the correct timing according to the input source.v
“Auto” / “1024x768” / “1280x768” / “1360x768” / “1366 x 768”.v
Ê GAMMA SELECTION
Changes the displayed color temperature.v
“2.2” / “2.4” / “Native”v
NOTE: sRGB picture mode is standard and cannot be changed.
Ê SCAN MODE
* : INPUT HDMI (HDMI INPUT MODE-HD), COMPONENT, S-VIDEO, VIDEO
only
Changes the display area of the image. v
“OVERSCAN”: Sets to display area about 95%. v
“UNDERSCAN”: Sets to display area about 100%.v
Ê SCAN CONVERSION
* : INPUT HDMI (HDMI INPUT MODE-HD), COMPONENT, S-VIDEO, VIDEO
only
Selects IP (Interlace to Progressive) converter function.v
“PROGRESSIVE”: Enables the IP function, to convert interlace signal to v
progressive. Normally use this setting.
“INTERLACE”: Disable the IP function.v
NOTE: This mode is better suited for motion pictures, but it might cause the prob-
lem of image retention.
Ê FILM MODE
* : INPUT HDMI (HDMI INPUT MODE-HD), COMPONENT, S-VIDEO, VIDEO
only
Selects Film mode function.v
“AUTO”: Enables the Film mode function. This mode is better suited for movies, v
which is converted 24 frames/sec source to DVD Video. We recommend to
select “PROGRESSIVE” in “SCAN CONVERSION”.
“OFF”: This mode is better suited for a broadcast source (like a set-top box) or v
VCRs.
set: exit: menu:
ADVANCED OPTION
INPUT RESOLUTION
GAMMA SELECTION
SCAN MODE
SCAN CONVERSION
FILM MODE
IR CONTROL
KEYBOARD CONTROL
TILING
DATE AND TIME
SCHEDULE
MONITOR ID
DDC/CI
SMART POWER
ADVANCED OPTION RESET
Sel Adjust Enter BACK Quit
ON
AUTO
OFF
set: exit: menu:
ADVANCED OPTION
INPUT RESOLUTION
GAMMA SELECTION
SCAN MODE
SCAN CONVERSION
FILM MODE
IR CONTROL
KEYBOARD CONTROL
TILING
DATE AND TIME
SCHEDULE
MONITOR ID
DDC/CI
SMART POWER
ADVANCED OPTION RESET
Sel Adjust Enter BACK Quit
ON
AUTO
OFF
set: exit: menu:
ADVANCED OPTION
INPUT RESOLUTION
GAMMA SELECTION
SCAN MODE
SCAN CONVERSION
FILM MODE
IR CONTROL
KEYBOARD CONTROL
TILING
DATE AND TIME
SCHEDULE
MONITOR ID
DDC/CI
SMART POWER
ADVANCED OPTION RESET
Sel Adjust Enter BACK Quit
ON
AUTO
OFF
set: exit: menu:
ADVANCED OPTION
INPUT RESOLUTION
GAMMA SELECTION
SCAN MODE
SCAN CONVERSION
FILM MODE
IR CONTROL
KEYBOARD CONTROL
TILING
DATE AND TIME
SCHEDULE
MONITOR ID
DDC/CI
SMART POWER
ADVANCED OPTION RESET
Sel Adjust Enter BACK Quit
ON
AUTO
OFF
set: exit: menu:
ADVANCED OPTION
INPUT RESOLUTION
GAMMA SELECTION
SCAN MODE
SCAN CONVERSION
FILM MODE
IR CONTROL
KEYBOARD CONTROL
TILING
DATE AND TIME
SCHEDULE
MONITOR ID
DDC/CI
SMART POWER
ADVANCED OPTION RESET
Sel Adjust Enter BACK Quit
ON
AUTO
OFF