Philips BDL3215E - Monitor ID, DDC;CI, and Smart Power; Advanced Option Reset

User Manual BDL3215E / BDL4225E
38
Ê MONITOR ID
ID numbers for remote control are assigned to BDL3215E/BDL4225E monitors 
that are multi-connected via RS-232C.
ID numbers 1 to 26 are selectable.
Ê DDC/CI
Turns “ON” or “OFF” the DDC/CI communication function. Selects “ON” for
normal use.
Ê SMART POWER
Selecting “SMART POWER” allows you to choose a certain level of power v
saving condition.
Selects “OFF” to set the system in normal power condition. v
Select “MEDIUM” to set the system in medium level power saving status. v
Select “HIGH” to set the system in high level power saving status. v
Press “EXIT” button to cancel and return to the previous menu.v
Ê ADVANCED OPTION RESET
Selecting “ADVANCED OPTION RESET” allows you to reset all OSD settings v
from “ADVANCED OPTION” menu, except for GAMMA SELECTION, “DATE
AND TIME”, “SCHEDULE, MONITOR ID”, and “DDC/CI”.
Selects “YES” and press “SET” button to restore the factory preset data. v
Press “EXIT” button to cancel and return the previous menu. v
“GAMMA SELECTION” is reset when “PICTURE RESET” in “PICTURE” menu v
is carried out.
set: exit: menu:
ADVANCED OPTION
INPUT RESOLUTION
GAMMA SELECTION
SCAN MODE
SCAN CONVERSION
FILM MODE
IR CONTROL
KEYBOARD CONTROL
TILING
DATE AND TIME
SCHEDULE
MONITOR ID
DDC/CI
SMART POWER
ADVANCED OPTION RESET
Sel Adjust Enter BACK Quit
ON
AUTO
OFF
set: exit: menu:
ADVANCED OPTION
INPUT RESOLUTION
GAMMA SELECTION
SCAN MODE
SCAN CONVERSION
FILM MODE
IR CONTROL
KEYBOARD CONTROL
TILING
DATE AND TIME
SCHEDULE
MONITOR ID
DDC/CI
SMART POWER
ADVANCED OPTION RESET
Sel Adjust Enter BACK Quit
ON
AUTO
OFF
set: exit: menu:
ADVANCED OPTION
INPUT RESOLUTION
GAMMA SELECTION
SCAN MODE
SCAN CONVERSION
FILM MODE
IR CONTROL
KEYBOARD CONTROL
TILING
DATE AND TIME
SCHEDULE
MONITOR ID
DDC/CI
SMART POWER
ADVANCED OPTION RESET
Sel Adjust Enter BACK Quit
ON
AUTO
OFF
set: exit: menu:
ADVANCED OPTION
INPUT RESOLUTION
GAMMA SELECTION
SCAN MODE
SCAN CONVERSION
FILM MODE
IR CONTROL
KEYBOARD CONTROL
TILING
DATE AND TIME
SCHEDULE
MONITOR ID
DDC/CI
SMART POWER
ADVANCED OPTION RESET
Sel Adjust Enter BACK Quit
ON
AUTO
OFF