Philips BDP3000 User Manual

11
Select menu display language
Note
If this product is connected to a HDMI CEC compliant 
TV, skip this setting. It switches automatically to the
VDPH26'PHQXODQJXDJHDVSHU\RXU79VHWWLQJLIWKH
ODQJXDJHVHWRQ79LVVXSSRUWHGE\WKLVSURGXFW
1 In the Home menu, select [Settings] and press
OK.
2 Select [Preference Setup], then press .
3 Select [Menu Language], then press .
The language options may vary from 
different regions.
4 Press to select a language, then press OK.
Setup network
To enjoy software updates of this product and BD-
Live bonus contents for certain Blu-ray discs, set up
the network connection.
Note
Ensure that the network cable is properly connected and 
the router is switched on.
1 Connect this product to the broadband
modem or router.
2 In the Home menu, select [Settings] and press
OK.
3 Select [Advanced Setup], then press .
4 Select [Network], then press OK.
5 Select [Next] in the menu, then press OK.
This product starts to detect if there is a »
connection to the network.
If the connection test fails, select » [Retry]
and press OK to re-connect again to the
network.
Video Setup
Advanced Setup
Audio Setup
Preference Setup
EasyLink Setup
Menu Language
Parental Control
Screen Saver
Display Panel
Auto Standby
VCD PBC
Change Password
3 Push and slide back the battery compartment
VHH´µLQWKHLOOXVWUDWLRQ
Note
If you are not going to use the remote control for a long 
time, remove the batteries.
Do not use old and new or different types of batteries

in combination.
Batteries contain chemical substances, so they should be

disposed of properly.
Find the correct viewing channel
1 Press to turn on this product.
2 Turn on the TV and switch to the correct
YLGHRLQFKDQQHOUHIHUWRWKH79XVHUPDQXDO
RQKRZWRVHOHFWWKHFRUUHFWFKDQQHO
Use the Home menu
1 Press .
To start disc play, select  [Play Disc].
To access the setup menus, select 
[Settings].
Navigate the menu
1 When a menu is displayed, press the buttons
on the remote control to navigate.
Button Action
Move up or down.
Move left or right.
OK &RQÀUPDVHOHFWLRQ
Enter numbers.
Settings
English
EN

Philips BDP3000 Specifications

Power

power supply	230-240 V, 50 Hz
power consumption	25 W
standby power consumption	0.5 W

Sound

signal to noise ratio	105 dB
dynamic range	100 dB
frequency response	(20 kHz) ±0.5 dB

Weight and Dimensions

packaging dimensions	525 x 125 x 285 mm
weight including packaging	3.77 kg
product dimensions	435 x 58 x 227 mm
product weight	3.00 kg