19
Toggle between calls
Press int to switch between the outside call
and the intercom call.
Transfer a call
1
Press int during a call.
2 Select or enter the handset number, then
press [OK] to confirm.
3 Press when the other side answers
your call.
The call is now transferred to the »
selected handset.
Make a conference call
A 3-way conference call is a call between you,
another handset user and the outside callers. It
requires two handsets to share the same base
station.
During an external call
1 Press int to initiate an internal call.
The handsets available for intercom are »
displayed.
The external caller is put on hold. »
2 Select or enter a handset number, then
press [OK] to confirm.
The selected handset rings. »
3 Press on the selected handset.
The intercom is established. »
4 Press and hold int on your handset.
You are now on a 3-way conference »
call with the external call and the
selected handset.
5 Intercom and
conference calls
An intercom call is a call to another handset
that shares the same base station. A conference
call involves a conversation among you, another
handset user and the outside callers.
Make a call to another handset
Note
If the base station only has 2 registered •
handsets, press int to make a call to another
handset.
1 Press int. The handsets available for
intercom are displayed.
2 Select or enter a handset number, then
press [OK] to confirm.
The selected handset rings. »
3 Press on the selected handset.
The intercom is established. »
4 Press to cancel or end the intercom
call.
Note
If the selected handset is occupied in a call, you •
hear a busy tone.
While you are on the phone
You can go from one handset to another
during a call:
1 Press int.
2 The current caller is put on hold.
3 Select or enter a handset number, then
press [OK] to confirm.
Wait for the other side to answer your »
call.
English
EN
To Next Page
Loading...
