Philips CD360 - Self-Defined Settings; Personalize the Phone Display; Personalize the Sounds

26
Personalize the sounds
Set the handset’s ringtone
You can select from 10 ringtones.
1 Press menu.
2 Select [PERSONAL SET] > [HANDSET
TONES] > [RING TONES], then press
[OK] to confirm.
3 Select a ringtone, then press [OK] to
confirm.
The setting is saved. »
Set the handset’s ringtone volume
You can select among 6 ringtone volume
levels or [OFF].
1 Press menu.
2 Select [PERSONAL SET] > [HANDSET
TONES] > [RING VOLUME], then press
[OK] to confirm.
3 Select a volume level, then press [OK] to
confirm.
The setting is saved. »
Tip
To turn off the ringtone, press and hold • in
standby mode. Then
displays on the screen.
Set the key tone
Key tone is the sound made when you press a
key on the handset.
1 Press menu .
2 Select [PERSONAL SET] > [HANDSET
TONES] > [KEY BEEP], then press [OK]
to confirm.
3 Select [ON]/[OFF], then press [OK] to
confirm.
The setting is saved. »
10 Self-defined
settings
Customize the settings to make it your own
phone.
Personalize the phone display
Name the handset
The name of the handset can be up to 10
characters. It is displayed on the handset
screen in standby mode.
1 Press menu.
2 Select [PERSONAL SET] > [HANDSET
NAME], then press [OK] to confirm.
3 Enter or edit the name. To erase a
character, press [BACK].
4 Press [OK] to confirm.
The setting is saved. »
Set the display language
Note
This feature only applies to models with •
multiple-language support.
Languages available for selection vary with
•
different countries.
1 Press menu.
2 Select [PERSONAL SET] >
[LANGUAGE], then press [OK] to
confirm.
3 Select a language, then press [OK] to
confirm.
The setting is saved. »
EN
All manuals and user guides at all-guides.com
all-guides.com