Philips CD360 - Set the Answer Mode; Outgoing Messages (OGM)

34
6 Press [OK] to stop recording or the
recording stops after 3 minutes.
The recorded outgoing message plays »
back automatically for your review.
Note
To restore the pre-recorded outgoing •
message, delete your current outgoing
message.
Listen to the current outgoing
message
1 Press menu.
2 Select [ANSWER MACHINE] >
[RECORD OGM], then press [OK] to
confirm.
3 Select [ANSWER & REC.] or [ANSWER
ONLY]. Press [OK] to confirm.
4 Select [PLAY], then press [OK] to
confirm.
The handset plays the current outgoing »
message.
Delete an outgoing message
1 Press menu.
2 Select [ANSWER MACHINE] >
[RECORD OGM], then press [OK] to
confirm.
3 Select [ANSWER & REC.] or [ANSWER
ONLY], then press [OK] to confirm.
4 Select [DELETE], then press [OK] to
confirm.
The handset displays a confirmation »
request.
5 Press [OK] to confirm.
6 The pre-recorded outgoing message is
restored.
Note
No pre-recorded outgoing message can be •
deleted.
Set the answer mode
You can set the answering machine and
select if the callers can leave messages. Select
[ANSWER & REC.] if you allow the callers to
leave messages. Select [ANSWER ONLY] if you
forbid the callers to leave messages.
1 Press menu.
2 Select [ANSWER MACHINE] >
[ANSWER MODE], then press [OK] to
confirm.
3 Select an answer mode, then press [OK]
to confirm.
The setting is saved. »
Note
If the memory is full, the answering machine •
switches to [ANSWER ONLY] mode
automatically.
Outgoing messages (OGM)
The outgoing message is the message your
caller hears when the answering machine picks
up the call. The answering machine has 2 pre-
recorded outgoing messages: the [ANSWER &
REC.] mode and [ANSWER ONLY] mode.
Record an outgoing message
The maximum length of the outgoing message
you can record is 3 minutes. The newly
recorded outgoing message automatically
replaces the old one.
1 Press menu.
2 Select [ANSWER MACHINE] >
[RECORD OGM], then press [OK] to
confirm.
3 Select [ANSWER & REC.] or [ANSWER
ONLY], then press [OK] to confirm.
4 Select [RECORD OGM], then press
[OK] to confirm.
5 Recording starts after the beep.
EN
All manuals and user guides at all-guides.com