37
Remote access commands
Key Function
1 Repeat current or play
previous message.
2 Play messages.
3 Skip to next message.
6 Delete current message.
7 Switch answering machine on
(not available during playback).
8 Stop message playback
9 Switch answering machine off
(not available during playback).
Activate/deactivate the remote access
You can allow or block remote access to the
answering machine.
1 Press menu.
2 Select [ANSWER MACHINE] >
[SETTINGS] > [REMOTE ACCESS],
then press [OK] to confirm.
3 Select a new setting, then press [OK] to
confirm.
The setting is saved. »
Access the answering machine
remotely
1 Make a call to your home number with a
touch tone phone.
2 Enter # when the outgoing message
starts playing.
3 Enter your PIN code.
You now have access to your »
answering machine, and the new
messages start playing.
Note
You have 2 chances to enter the correct PIN •
code before your phone hangs up.
4 Press a key to carry out a function. See
the Remote access commands table
below for a list of available functions.
Note
When no message plays, the phone hangs up •
automatically if no key is pressed for 8 seconds.
English
EN
To Next Page
Loading...
