Messages on your DVD Recorder display
The following messages may appear on your DVD Recorder display. If you name a disc, the disc
name will appear on the display panel as well
No signal or poor signal strength
uPE_, _ Disc tray is opening.
FI rTC f _lF
LLU_ __ Disc tray is closing.
After a successful recording, the list of disc contents is updated.
r-¢7 rTT
,_uF_ ?fT,_:
You received a copy-protected signal. This may come from a
copy-protected DVD/videotape of a DVD/video player or from a TV
channel.
_1¢7 33 j C_-
I_U JJ J Z3L
No disc has been inserted. If a disc has been inserted, then it is possible
that the disc cannot be read.
_US_
The DVD Recorder is busy making changes DVD-compatible.
Inserted disc is new or has been completely erased (no recordings
present).
_ _/ j J JLE
The maximum number of titles has been reached for the disc. Each disc
can have a maximum of 48 titles
Disc is full. There is no room for new recordings.
A disc with NTSC recordings has been inserted and an attempt was
made to record a PAL signal Insert a new disc or use a disc containing
PAL recordings.
To Next Page
Loading...
