4
5
Enter the entire PlusCode number• This number is up to 8 digits
long and can be found next to the start time of the TV program
in your TV listings magazine•
e.g.: 5-234-89 or 5 234 89
Enter 523489 for the RusCode number•
If you make a mistake, you can clear the entry with CLEAR •
I :tCo%ngop ,ons
Mo-Fr': Repeated daily recordings from Monday to Friday,
I Weekly' Repeated weekly recordings (every week on the same day),
Confirm with OK.
xThe following message appears on the screen: 'Please enter
channel numbed
¢_ The channel number of the TV channel has not yet been assigned to
the PlusCode number. Using • , _ or the number buttons 0..9 on
the remote control, select the corresponding channel number (name)
of the TV channel and confirm with OK,
xThe following message appears on the screen: 'PlusCode
number wt'ong _
¢_ The entered PlusCode number is incorrect. Repeat your entry or
cancel using the SYSTEM-MENU button.
¢_ Check the time/date (see 'Setting the time & date' in 'lnstaliing your
DVD recorder').
x The following message appears on the screen: 'Date does not
match Mon-FrP
¢_ A daily recording was entered for the wrong clay, Daily programming
can only be used for recordings to be made from Monday to Friday,
Problem
Timer
VCR Plus+system
PlusCode number
M0-FrANeekly To store
Press SELECT Press OK
6
The decoded data appears after confirmation. You can go back
and change the data Select the appropriate input field with _ or
4. Change the information with A, • or the number
buttons 0..9.
Change 'AM/PM'
Use the SELECT button to select 'AM or 'P/_" in the input fields
'Start' and 'End.
Changing the recording mode
Select 'RecMode' using • •
Using • , • , select the recording mode 'M1, MZ M2x, M3, M4, M_.
Tip
Timer
VCR Plus+system
Rec
Date Ch. Start End Mode
01/22 001 08:3fiAM 10:00PM M1
To store
Press OK
84 Programming a recording (TIMER)
To Next Page
Loading...
