Manually setting the time & date
If the time is incorrect, this could be due to a weak or disrupted TV signal If this is the case,
switch off the automatic function
3
4
Press SYSTEM-MENU on the remote control. The menu bar
will appear.
Select 'T_' using • or _ .
select line 'Installation' using • or • and confirm with _ .
Select line 'Time/Date' using • or • and confirm with _ .
Select 'Manual with • or •.
6
7
8
Confirm with OK.
Change the time in line 'Time' using the number buttons 0,,9 on
your remote control
Check 'AM/Pf_, 'Year _, 'Month', and 'Date' in the same way
To select between the fields, use • or •
Change the information with • , _ or the number buttons
0,,9.
9
10
11
Select one of the following settings in line 'Daylight Saving':
'On': The time set corresponds to the summer time (summer
time is on)
'Of/': The time set corresponds to the winter time (summer time
is off)
When all settings are correct, confirm with OK.
To end, press SYSTEM-MENU
If the setting has been confirmed with OK the automatic system is disabled.
Time/Date
Manual
Time 09:02
AM/PM AM
Year 2003
Month 01
Date 01
Daylight Saving Off
To exit press
SYST£MMENU
30 Installing your DVD recorder
To Next Page
Loading...
