Changing the media settings
You can adjust various settings for a DVD+RWI+R or a memory card. If a CD-R/RW is loaded
no changes can be made, because this media cannot be recorded by the DVD recorder
1
Press PHOTO on the remote control. The 'Media menu'
screen will appear.
2
Use • or • to select the medium you want to process (disc
or memory card). If you did not insert the corresponding medium
(disc or memory card), a warning sign will appear above the
symbol on the left hand side of the screen
Press I_.
Select the line 'Media settings' and confirm with OK.
'Media name'
The name of the media will be created by the digital camera
'Media protecte_
The write protection of the media can be switched on or off.
You can use this function only if the write protection can be switched off by a software. You can
not select this line if your memory card was equipped with a mechanically switch.
'Prepare media'
The DVD+RW/+R will be prepared for the data transfer. Read further information in the section
, , + +
Preparing a DVD RW/ R.
'Finalize disc'
You can select this line only if a 'not finalized' DVD+R is loaded
If you store pictures on a DVD+R, you have to finalize the disc to play it on a DVD-player
Once this process is complete, no further changes can be made.
'Erase media'
With these setting all data (rolls and albums) can be erased on a recordable media (DVD+RW
or memory card). This procedure cannot be reversed
64 The 'Digital Photo Manager'
To Next Page
Loading...
