1-10-1 E9480TEST
FIRMWARE RENEWAL MODE
1. Make a copy of the data for update to a CD-R or
CD-RW.
2. Set the disc made in Step 1 on the tray and close.
3. Turn on the DVD recorder while pushing [DVD
OPEN/CLOSE A] button and [DVD RECORD I]
button at the same time. Update of F/W will begin
after “FORCED DOWN” is displayed on DVD FLD.
4. Update of F/W will be performed automatically and
the DVD recorder will be in the standby mode.
Then press [DVD OPEN/CLOSE A] button on the
DVD recorder and remove the disc.
To Next Page
Loading...
