Important:
Before you operate the system, complete
the preparation procedures.
Plug and Play
The system provides PLUG and PLAY feature
that allows you to store all available radio
stations and RDS stations automatically upon
power up.
If the PLUG and PLAY has not been
installed
1
Upon power up, “AUTO INSTALL - PRESS
PLAY” will be displayed.
2
Press PLAY (on the system only) to start
installation.
➜ “INSTALL” will be displayed and followed by
“TUNER” and then "AUTO".
➜ The
PROGRAM
starts flashing.
➜ PLUG and PLAY will start searching for all
RDS radio stations with sufficient signal strength
and then followed by radio stations on FM, MW
and LW band respectively. Weak RDS radio
stations may be stored in later presets.
➜ All available RDS and radio stations with
sufficient signal strength will be stored. Up to 40
presets may be stored.
➜ The last preset radio station or the first
available RDS station will appear on the display
when PLUG and PLAY is completed.
3
The system will proceed to set the RDS time
automatically with the stored RDS preset station.
● If no RDS station is available in the first preset
station, the program will exit automatically.
➜ After the RDS radio station is found,
“INSTALL” will be displayed and followed by
“TIME”.
● When searching RDS time;
➜ “SEARCH RDS TIME” will be displayed.
➜ When RDS time is read, “RDS TIME” will be
displayed. The current time will be displayed for 2
seconds and stored automatically.
Note:
– If RDS station does not transmit RDS time
within 90 seconds, the program will exit
automatically and the display will show “NO RDS
TIME”.
To reinstall the PLUG & PLAY
1
In Standby or Demostration mode, press and
hold PLAY for 5 seconds (on the system only)
“AUTO INSTALL - PRESS PLAY” will be
displayed.
2
Press PLAY (on the system only) again to star
t
installation.
● To exit without storing the PLUG and PLAY,
press Ç button (on the system only).
11
English
Controls
^
MODE SELECTION
SEARCH àá (TUNING àá )
for CD ................. to search backward/forward.
for TUNER ......... to tune to a lower or higher radio
frequency.
for TAPE .............. to rewind or fast forward a tape.
for CLOCK ....... to set the hour (on the system
only)
.
STOP•CLEAR Ç
for CD ................. to stop disc playback or to clear
a program.
for TUNER ........ to stop programming (on the
system only).
for TAPE .............. to stop playback or recording.
for DEMO ......... to start or stop demonstration
mode (on the system only).
for CLOCK ....... to exit clock setting or cancel
timer (on the system only).
for PLUG & PLAY
................................. to exit plug & play mode and
return to standby mode (on the
system only).
PLAY É / PAUSE Å
for CD ................. to start or interrupt playback.
for TAPE .............. to start playback.
for PLUG & PLAY
................................. to initiate and star t plug & play
from standby/demo mode (on
the system only).
PREV í / NEXT ë(PRESET 4 3 )
for CD ................. to skip to the beginning of the
current, previous, or next track.
for TUNER ........ to select a preset station in
memory.
for CLOCK ....... to set the minute (on the system
only)
.
&
RDS
– to select RDS data in the following order: station
name, program type, radio text and frequency.
*
NEWS
– to hear news automatically.
(
VOLUME
– to increase or decrease the volume.
Notes for remote control:
– First select the source you wish to control
by pressing one of the source select keys on
the remote control (e.g. CD , TUNER, etc.).
– Then select the desired function (É,
í,
ë,
etc.).
)
OPTIMAL SOUND MIX
– optimal mix of various sound features of the set
to create the most impressive listening
experience at one touch of a button.
¡
n
– to connect headphones.
™
PROGRAM
for CD ................. to program disc tracks.
for TUNER ........ to program preset radio stations.
for CLOCK ....... to select 12 or 24 hour in clock
setting mode
.
£
DIM
– to select different brightness for the display
screen : DIM 1, DIM 2, DIM 3 or DIM OFF.
≤
TAPE DECK 2
∞
TAPE DECK 1
§
REPEAT
– to repeat a disc track, a disc, or all available discs.
≥
SLEEP
– to switch the system to standby mode at a
selected time.
•
SHUFFLE
– to play all the available discs and their tracks in
random order.
ª
B
– to switch the system to standb
y mode or eco
power standby mode.
To Next Page
Loading...
