Philips FW-C380 - Additional Features For FW-C380;21; Karaoke; Tuner

2-14
English
Pr Additional Features For FW-C380/21
eparations
SUBWOOFER OUT
DIGITAL OUT
HIGH POW
ER SUBWO OFER
S
U
B
W
O
O
F
E
R
L
E
V
E
L
C
O
N
T
R
O
L
STANDBY ON
CUT OFF FREQUENCY
60Hz 150Hz
MIN MAX
AUDIO OUT
LR
AM ANTENNA
R
+
–
L
–
+
LR
A
H
B
D
E
F
C
AC
MAINS
~
FM AERIAL
75Ω
AUX/
CDR
IN
VOLTAGE SELECTOR
220V- 240V 110V- 127V
G
Rear Connections
G
Adjusting the Operating Voltage (for /21 version only) Before connecting the AC power cord to the wall outlet, make sure that the voltage selector at the rear of the system is set to the local power line voltage. If not, reset the selector before connecting to the wall outlet.
H
AC Power Supply After all other connections have been made, connect the AC power cord to the system and to the wall outlet.
MICROPHONE - LEVEL
Karaoke
Microphone Mixing (for /21 version only)
1
Set the MIC LEVEL control to the minimum level to prevent acoustic feedback (e.g. a loud howling sound) before you connect the microphone.
2
Connect a microphone to the MICROPHONE socket.
3
Press CD, TUNER, TAPE or AUX.
4
Play the selected source.
5
Adjust the volume level with VOLUME control.
6
Adjust the MIC LEVEL control to the mixing
level that you want.
7
Start singing or talking through the microphone. Note: –Keep the mic away from the speakers to prevent howling.
English
Tuner
Additional Features For FW-C380/21
Changing the MW tuning grid (for /21 version only) The frequency step can be changed if necessary. In North and South America, the frequency step between adjacent channels in the MW band is 10 kHz. In other parts of the world, it is 9 kHz. The frequency step preset in the factory is 9 KHz. For MW Band To change from 9 kHz to 10 kHz or vice versa Changing of tuning grid will erase all previously stored preset stations.
1
Disconnect the system from the AC power supply (pull out the AC power cord).
2
Press and hold TUNER and TUNING á
while reconnecting the system to the AC power supply. ➜ Display will show “GRID 10” or “GRID 9”.
Notes: – GRID 9 indicates that the tuning grid is in step of 9 kHz in MW band. GRID 10 indicates that the tuning grid is in step of 10 kHz in MW band. – FM tuning grid will also be changed from 50 kHz to 100 kHz or vice ver
sa.