15
English
VIRTUAL ENVIRONMENT CONTROL
(VEC)
The VEC feature enables you to adjust the
system to select a type of environment.
1
Press to select the VEC feature.
➜ VEC led lights up.
2
Adjust the JOG to select the desired Virtual
Environment Control setting : CINEMA, HALL or
CONCERT.
➜ The selected environment is encircled.
➜ "CINEMA, HALL or CONCERT" will be
displayed.
DYNAMIC BASS BOOST (DBB)
The DBB mode enhances the bass response.
1
Press to select the DBB feature.
➜ DBB led lights up.
2
Adjust the JOG to select the desired DBB level
or to switch off DBB.
➜ The selected bass response is encircled.
➜ "DBB 1, DBB 2, DBB 3 or DBB OFF" will
be displayed.
Note:
– If DBB 1/2/3 is selected, the corresponding
number flag will be displayed.
INCREDIBLE SURROUND
Normal stereo sound is determined by the
distance between the front speakers. When
Incredible Surround is switched on, it magnifies
the virtual distance between the front speakers
for an incredibly wide, enveloping, stereo effect.
¶ Press INCREDIBLE SURROUND to switch
on.
➜ The INCREDIBLE SURROUND led lights up.
➜ “INCR SURROUND” and the INC. SUR flag
will be displayed.
To switch off Incredible Surround
¶ Press INCREDIBLE SURROUND again.
➜ The INCREDIBLE SURROUND led is
switched off.
➜ “IS OFF” will be displayed.
➜ The INC. SUR flag disappear from the display.
OPTIMAL SOUND MIX
The Optimal Sound Mix features gives a various
sound features of the set to create the most
impressive listening experience at one touch of a
button.
To switch on Optimal Sound Mix
¶ Press OPTIMAL SOUND MIX.
➜ The OPTIMAL SOUND MIX button lights
up.
➜ “OPTIMAL SOUNDMIX” and (((OSM))) flag
will be displayed.
To switch off Optimal Sound Mix
¶ Press OPTIMAL SOUND MIX again.
➜ The OPTIMAL SOUND MIX button light is
switched off.
➜ “OSM OFF” will be displayed.
➜ (((OSM))) flag dissappear from the display.
¶ Press any of the sound button (DBB, DSC,
VEC, IS).
➜ The sound feature message will be displayed.
➜ (((OSM))) flag dissappear from the display.
Operating the System
16
English
Compact Disc
Warning!
1)
This system is designed for conventional
discs. Do not use any accessories such as
disc stabilizer rings or disc treatment sheets,
etc., which may damage the disc
mechanism.
2)
Do not load more than one disc into each
tray.
3)
When the CD changer is loaded with discs,
do not turn over or shake the system. This
may jam the changer.
You may load three discs in the CD
changer for continuous playback without
interruption.
Discs for playback
This system can play all digital audio disc,
finalized digital audio CD-Recordable and
finalized digital audio CD-Rewritable format
discs.
Loading the CD Changer
1
Press CD to select CD mode.
2
Press OPEN•CLOSE.
➜ The CD changer tray slides out.
3
Load a disc with the printed side up in the right
tray.
¶ You can load another disc in the left tray.
¶ To load the third disc, press the DISC
CHANGE button.
➜ The CD changer tray will rotate until the
empty tray is ready for loading.
4
Press OPEN•CLOSE to close the CD changer
tray.
➜ The total number of tracks and the playing
time of the selected disc appear on the display.
Note:
–To ensure good system performance, wait until
the CD changer completely reads the disc(s) before
proceeding.
Disc Direct Play
¶ You can play a disc directly by pressing the
DISC 1, DISC 2 or DISC 3 button. The CD
player will stop at the end of playback of the
selected disc.
➜ A lit button indicates that a disc is loaded in
the disc tray.
➜ A flashing button indicates that a disc is
playing.
To Next Page
Loading...
