Philips FW-C380 - Controls; Controls on the player and remote control; Operating the System; Selecting the source

2-3
9
English
Preparation
D
Connecting other equipment to your system You can connect the audio left and right OUT terminals of a TV, VCR, Laser Disc player, DVD player or CD Recorder to the AUX IN terminals at the rear of the system.
E
Subwoofer Out Connection Connect the optional active subwoofer to the SUBWOOFER OUT terminal. The subwoofer reproduces just the low bass sound effect (e.g. explosions, the rumble of spaceships, etc.). Be sure to follow the instructions supplied with the subwoofer.
F
Digital Out Connection You can record the digital sound from the CD, through this output, on any audio equipment with digital input (e.g. CD Recorder, Digital Audio Tape (DAT) deck, Digital to Analog Converter and Digital Signal Processor). Connect one end of the cinch cable (not supplied) to the DIGITAL OUT socket and the other end to the audio equipment with digital input. When connecting the cinch cable, make sure it is fully inserted.
G
AC Power Supply After all other connections have been made, connect the AC power cord to the system and to the wall outlet.Inserting batteries into the Remote Control
Inserting batteries into the Remote Control
¶ Insert the batteries (not supplied) into the
remote control as shown in the battery compartment (Type R06 or AA).
+
-
+
-
CAUTION – Remove batteries if they are exhausted or not to be used for a long time. – Do not use old and new or different types of batteries in combination. – Batteries contain chemical substances, so they should be disposed off properly.
10
English
Controls
(illustrations on page 3)
Controls on the player and remote control
1
STANDBY-ON
yy yy
y
– switches the system to standby/on.
2
ECO POWER
– to switch the system to eco power standby
mode or to wake up the system to last selected source.
3
DISC 1 / DISC 2 / DISC 3 (DISC DIRECT PLAY)
– to select a disc tray for playback.
4
RECORD
– to start recording on tape deck 2.
5
SOUND CONTROL
– to select the desired sound feature: DSC, VEC, or
DBB.
6
JOG
– to select the desired sound effect of DSC/VEC/
DBB setting. You must select the respective sound feature first. DBB (DYNAMIC BASS BOOST)
– to select the desired bass effect : DBB 1, DBB 2,
DBB 3, DBB OFF. DSC (DIGITAL SOUND CONTROL)
– to select the desired Digital Sound Control effect
: OPTIMAL, JAZZ, ROCK or TECHNO. VEC
– to select the desired Virtual Environment
Control effect : CINEMA, HALL or CONCERT.
7
INCREDIBLE SURROUND
– to switch on or off the surround sound effect.
8
CLOCK•TIMER
– to view the clock, set the clock or set the timer.
9
DUBBING
– to dub a tape.
0
AUTO REPLAY
– to select playback mode either in continuous
AUTO REPLAY or ONCE only.
!
DISPLAY SCREEN
– to view the current setting of the system.
@
DISC CHANGE
– to change disc(s).
#
OPEN•CLOSE
– to open or close the CD changer tray.
$
CD CHANGER TRAY
%
SOURCE – to select the following: CD / (CD 1•2•3)
– to select CD mode. When disc playback is
stopped, press to select disc tray 1, 2 or 3. TUNER / (BAND)
– to select Tuner mode. When in tuner mode,
press to select the waveband: FM, MW or LW. TAPE / (TAPE 1• 2)
– to select Tape mode. When tape playback is
stopped, press to select either tape deck 1 or 2. AUX (VIDEO/CDR)
– to select sound from an external source (e.g. TV,
VCR, Laser Disc player, DVD player or CD Recorder). When in AUX mode, press to select either AUX or CDR.
2
21
3
TUNERTAPE 1/2CD
OSMAUXINC.SURR.
DSC VEC
DBB 1/2/3
REPEAT
SLEEP
SHUFFLE
CD DIRECT
VOLUME
á
à
ë
í
É
Ç
Å
6
^ ^
(
§
3
7
%
6
6 ^
(
≥
•
)
ª