Plug & Play, Demo 13
PLUG & P
LAY
Plug and play automatically detects and programs all available radio
stations (up to 40). Plug and Play will be activated when you turn on
the system for the first time.
1
Turn the system on.
2
Press the PLAY
33
button when “AUTO INSTALL—PRESS
PLAY” appears in the display window.
● “INSTALL” will appear, followed by
“TUNER” then “AUTO”.
● “Prog” flashes as the tuner searches for
radio stations on the FM and AM bands.
3
The system stops searching and the last preset station
plays when all radio stations with sufficient signal have been
programmed, or the limit of 40 programmed stations has been
reached.
●If you skip Plug and Play installation, it will reactivate next
time you turn the system on.
Demo
The system features a demonstration mode that shows it’s various fea-
tures.
1
Turn the system off (standby).
2
After five seconds DEMO ON will appear on the display. if
it does not appear, press and hold
77
on the system until DEMO
ON appears.
3
The demonstration will begin.
4
Press and hold
77
until DEMO OFF appears on the display. The
system returns to Standby Mode.