Manual Programming, Deleting Presets 21
MANUAL PROGRAMMING
1
Press PROG. The next available preset number appears you want
to begin programming from a specific preset number.
2
Press 1 or ¡ to tune to the desired frequency.
3
Press PROG once a radio station is found to program it. If you do
not want to program the station, repeat step three.
4
Press w or ∑ to select another preset number.
5
Repeat steps 2-5 to program more stations.
● Press 7 to stop to exit the manual program.
DELETING P
RESET RADIO
STATIONS
1
Press w or ∑ to select the desired preset number.
2
Press and hold 7 until “PRESET DELETED” appears on the dis-
play. All other presets higher than the one deleted decrease by one.
To Next Page
Loading...
