Philips IntelliVue Telemetry System Infrastructure - Page 175

Index
IntelliVue Telemetry System Infrastructure Installation and Service Guide Index-3
Channels, 2.4 GHz ITS 1-15
Channels, assigning 2.4 GHz ITS 2-23
Coaxial Cable Connectors on Core AP 1-8
Coaxial Cable Connectors on remote antenna 1-8
Components, ITS 1-3
Copyright information
ii
Cordless phones, as 2.4 GHz interference source 2-21
Core AP description 1-6
Core APs
description of 1-6
placement guidelines 2-8
D
Daisy-chained topology for Sync Units 2-15
Data flow, within the ITS 1-13
Default Group 3-27
Default WMTS Group 2-32, 2-33
Digital Enhanced Cordless Telecommunications (DECT) 1-2
DIP switch settings for standard access points 1-4
Document organization
x
Document printing history ii
Duplicate IP address system-level alert 4-10, 4-12, 5-9
E
Emergency hospital power, devices that must be on 2-13
Enable AP 3-38, 3-39
Environmental specifications 1-27
Equipment closets, considering locations of 2-11
Ethernet interface, APC 1-10
Ethernet interface, on APs 1-4
Ethernet interface, on cluster APs 1-7
ETSI 2-33, 3-27
EXT 10MHz REF input on Sync Unit 1-12
F
FCC 2-33, 3-27
FCC registration, required for WMTS 1-15
FDX LED 1-5
Ferrite block, installing on AP cable 3-5, 4-7
Filter Settings 3-21
Frequency Plan 2-33, 3-27, 3-30, 3-39
Frequency plan
1, 6, 11 2-24
1, 7, 13 2-24
FROM POWER HUB connectors on Sync Unit 1-11