Alignments
GB 46 L9.2E8.
(*) Remark: When option RC = OFF, the P+ and the P- key on
the remote control have the same functions as the MENU UP/
DOWN keys while the VOL+ and the VOL- key have the same
function as the MENU LEFT/RIGHT keys. When RC=OFF, it is
not possible to change the channel preset or to adjust the
volume in SAM/SDM with the remote control.
RC = OFF for use with L7-based remote control (only cursor
keys). RC = ON for use with A8-based remote control (cursor
keys, P+/P- and Volume+/Volume-).
8.5 Option bits/bytes
Option bytes
OB1 bits 8, 7, ..., 1: DP, FQ, AM, HS, HT, DM, GM, VI
OB2 bits 8, 7, ..., 1: CK, CL, AT, CI, (res), (res), SS, SP
OB3 bits 8, 7, ..., 1: RC, WE, (res), (res), TW, AC, C8, VM
OB4 bits 8, 7, ..., 1: TN, FV,XT,2X, XS, CD, BM, NI
OB5 bits 8, 7, ..., 1: EX, CX, NR, CP, CT, EW, BS, AS
OB6 bits 8, 7, ..., 1: BT, IS, VL, DV, UB, LV, DU, AO
OB7 bits 8, 7, ..., 1: ST, ST, SB, SB, SB, SY, SY, SY
An option byte value is calculated in the following way:
value "option bit 1" x 1 =
value "option bit 2" x 2 =
value "option bit 3" x 4 =
value "option bit 4" x 8 =
value "option bit 5" x 16 =
value "option bit 6" x 32 =
value "option bit 7" x 64 =
value "option bit 8" x 128 =
Total : value "option byte" =
To Next Page
Loading...
