Power-up Defaults Menu
Power-up Defaults Menu And Diagnostic Mode 39
7. After making any desired changes to the menu items, choose the menu item Accept
current setting?
8. Select YES.
9. Select
Done.
Upon selecting Done, a Notice Screen appears, with the directions that the monitor
must be powered off, and that any changes made to the power-up defaults are in effect
the next time the unit is powered up.
Language*** English
French
German
Italian
Japanese
Portuguese
Spanish
Russian
Chinese
Dutch
Turkish
Arabic
Norwegian
Swedish
Finnish
Polish
Czech
The language selected will be used for all
the text shown on the display; the selected
language will be effective the next time the
monitor is powered up.
Note: Language selection screen upon
boot up can be reactivated by
following the steps listed in the
section Restoring Factory
Settings.
Enter Diagnostic
Mode
Yes
No
If Yes is chosen, the Power-up Defaults
Menu is exited and the Diagnostic Menu
appears.
Done When selected, the Power-up Defaults
Menu is immediately exited and the user is
instructed to power down the monitor.
* The choice in effect at the time the screen is accessed is shown in parentheses following the menu item.
** Bold type indicates the choice when the factory-set default menu appears. The highlighting is displayed in
reverse video.
*** Although the language choices are shown here in English, they appear in their own respective language and
script on the Boot Up Screen and in the Power-up Defaults Menu.
Menu Item* Choices** Explanation
To Next Page
Loading...
