What to do if Philips NPX230/INT Projector only shows home menu when connected to computer?
If your Philips Projector only shows the home menu and not the image from the connected computer, check the following: * Ensure that the HDMI output of the computer is turned on. * Verify that the resolution of the computer is set to 1920*1080.
Why is there no sound from the external device connected to my Philips NPX230/INT?
If your Philips Projector isn't producing sound from the external connected device, try these steps: * Check the cables connected to the external device. * Ensure that the sound is activated on the external device. * Use only the original cables provided by the device manufacturer, as others may not function correctly.
How to enable sound from computer connected to Philips NPX230/INT via HDMI?
If there is no sound from your Philips Projector when you connect your computer using an HDMI cable, make sure that the sound is activated on the computer.
How to enable sound from external HDMI output device on Philips Projector?
If there is no sound from the external HDMI output device connected to your Philips Projector, set the audio setting on the HDMI output device to Multichannel (Raw data) & Stereo (PCM).
What to do if there is no image from external HDMI device on Philips NPX230/INT Projector?
If your Philips Projector is not displaying an image from the external HDMI device, try these steps: 1. Ensure that you have selected the correct input source (HDMI). 2. Disconnect the HDMI cable or switch off the HDMI device. 3. Wait for three seconds. 4. Reconnect the HDMI cable or switch on the HDMI device again.
How to fix Philips NPX230/INT Projector that cannot be turned on?
If your Philips Projector does not turn on, disconnect and reconnect the power cable, and then try turning the projector on again.
Why does my Philips NPX230/INT only show the home menu and not the image from the external device?
If your Philips Projector only shows the home menu and not the image from the external device, check the following: * Ensure that the cables are connected to the correct sockets. * Verify that the external device is turned on. * Confirm that the video output of the external device is enabled.
Why does my Philips NPX230/INT keep turning itself off?
If your Philips Projector turns itself off, ensure that the power cable is connected correctly. This issue may happen if the projector is running for an extended period, causing the surface to become hot.
What to do if Philips NPX230/INT Projector cannot be turned off?
If your Philips Projector cannot be turned off, press and hold the power button for longer than ten seconds. If this does not work, disconnect the power cable.
How to fix Philips NPX230/INT Projector that cannot read USB storage device?
If your Philips Projector does not read the USB storage device, it may be due to the file system format. Format the USB storage device in FAT32 or NTFS format, and then try using it again.
To Next Page
General