EasyManuals Logo

Philips OLED908 Series User Manual

Philips OLED908 Series
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
another Philips TV.
Channel List Version
Check the current version of the channel list:
1 - Select Settings > Channels & Inputs >
Channels and press (right) to enter the menu.
2 - Select Channel List Copy and select Current Version,
then press OK.
3 - Press (left) repeatedly if necessary, to close the
menu.
Upload a Channel List to TV
To not Installed TVs
Depending on whether your TV is already installed or
not, you must use a different method to upload a
channel list.
To a TV that is not yet installed
1 - Plug in the power plug to start the installation and
select language and country. You can skip the channel
search. Finish the installation.
2 - Plug in the USB flash drive that holds the channel list
of the other TV.
3 - To start the channel list upload,
select Settings > Channels & Inputs > Channels >
Channel List Copy > Copy to TV and press OK. Enter
your PIN code if necessary.
4 - The TV notifies you if the channel list is copied to the
TV successfully. Unplug the USB flash drive.
To Installed TVs
Depending on whether your TV is already installed or
not, you must use a different method to upload a
channel list.
To an already installed TV
1 - Verify the country setting of the TV. (To verify this
setting, see chapter Reinstall All Channels. Start this
procedure until you reach the country setting.
Press Back to cancel the installation.)
If the country is correct continue with step 2.
If the country is not correct, you need to start a
reinstallation. See chapter Reinstall All Channels and
start the installation. Select the correct country and skip
the channels search. Finish the installation. When done,
continue with step 2.
2 - Plug in the USB flash drive that holds the channel list
of the other TV.
3 - To start the channel list upload,
select Settings > Channels & Inputs > Channels >
Channel List Copy > Copy to TV and press OK. Enter
your PIN code if necessary.
4 - The TV notifies you if the channel list is copied to the
TV successfully. Unplug the USB flash drive.
20

Other manuals for Philips OLED908 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Philips OLED908 Series and is the answer not in the manual?

Philips OLED908 Series Specifications

General IconGeneral
Display TypeOLED
Resolution4K Ultra HD (3840 x 2160)
Operating SystemGoogle TV
HDMI Ports4
USB Ports3
ProcessorP5 AI Perfect Picture Engine
Refresh Rate120Hz
EthernetYes
Dimensions (Without Stand)Varies by screen size
Weight (Without Stand)Varies by screen size
HDRDolby Vision, HDR10+
Ambilight3-sided
Sound SystemBowers & Wilkins
Wireless ConnectivityWi-Fi, Bluetooth
Voice AssistantGoogle Assistant
Screen Size55-inch, 65-inch, 77-inch
Smart FeaturesChromecast built-in

Related product manuals