Philips OLED908 Series User Manual

Note:
The Subwoofer Pre-Out has a preset cross-over
frequency setting. The cross over is 30Hz at -3dB.
In order to get the best experience, please connect your
subwoofer without any cross-over filters applied or to
the maximum Low Pass Filter frequency settings
available.
9.14. Computer
You can connect your computer to the TV using an Ultra
High Speed certified HDMI cable and use TV as a PC
monitor.
* Note for Nvidia Graphics card users:
If you connect your computer to TV via HDMI, Nvidia card
may automatically output Variable Refresh Rate (VRR)
video to TV when TV’s HDMI Ultra HD setting is Optimal
(Auto Game) or Optimal (Auto Game 120Hz Pro).
Please always ensure to turn off VRR function in graphics
card before you change TV’s HDMI Ultra HD to Optimal
or Standard, the TV UI selection Optimal or Standard
will turn off VRR support in TV.
* Note for AMD Graphics card users:
If you connect your computer to TV via HDMI, please
ensure following settings in graphics card used to have
proper performance.
- If graphics card output video is 4096 x 2160p or 3840 x
2160p and RGB pixel format is used, RGB 4:4:4 pixel
format studio (limited RGB) shall be set in computer
graphic card.
- If graphics card output video is 2560 x 1440p 120Hz
and RGB pixel format is used, RGB 4:4:4 Pixel Format PC
Standard (Full RGB) shall be set in computer graphic card.
35

Philips OLED908 Series Specifications

General

Display Type	OLED
Resolution	4K Ultra HD (3840 x 2160)
Operating System	Google TV
HDMI Ports	4
USB Ports	3
Processor	P5 AI Perfect Picture Engine
Refresh Rate	120Hz
Ethernet	Yes
Dimensions (Without Stand)	Varies by screen size
Weight (Without Stand)	Varies by screen size
HDR	Dolby Vision, HDR10+
Ambilight	3-sided
Sound System	Bowers & Wilkins
Wireless Connectivity	Wi-Fi, Bluetooth
Voice Assistant	Google Assistant
Screen Size	55-inch, 65-inch, 77-inch
Smart Features	Chromecast built-in