11
English
2
Place the toothbrush bristles against the teeth at a slight angle (45
degrees). Pressing firmly to make the bristles reach the gumline or slightly
beneath the gumline.
Note: Keep the center of the brush in contact with the teeth at all times.
3
Press the power on/off button to switch on the Philips Sonicare.
4
Gently keep the bristles placed on the teeth and in the gumline. Brush your
teeth with small back and forth motion so the bristles reach between the
teeth. Continue this motion throughout your brushing cycle.
Note: The bristles should slightly flare. It is not recommended to scrub as
you would with a manual toothbrush.
Note: If you apply too much pressure, you will be alerted by a change in
vibration of the handle and a flashing purple brushing feedback light.
To Next Page
Loading...
