EN 10
7
AC~ Socket
Connect to the power supply.
8
Wall bracket slot
Surround R/L
This section includes an overview of the
Surround R/L
1
DC IN Socket
Connect to the power supply.
2
RCA Cable port
Use the RCA cable to connect the
Left and Right Surround sound.
3
PAIR button
Surround R/L can automatically link
to the soundbar. If not, press this
button 5 seconds to link again.
4
PAIR LED indicator (Red)
Determine the status based on the
PAIR indicator.
LED State Status
Fast blink Surround R/L in pairing mode.
Slow blink Pairing Failed.
Constant on Connected / Pairing successful
Main unit Connectors
This section includes an overview of the
connectors available on your Soundbar.
1
USB
• Audio input from a USB storage
device.
• Upgrade software of this
product.
2
AUX
Audio input from, for example, an
MP3 player (3.5mm jack).
3
OPTICAL
Connect to an optical audio output
on the TV or a digital device.
4
(Wi-Fi Setup) button
• Trigger Wi-Fi setup.
• Press and hold the button for 5
seconds to active the Wps mode.
• Press and hold the button for 20
seconds to reset the Wi-Fi settings.
5
HDMI OUT (eARC/ARC)
Connect to the HDMI input on the
TV.
6
HDMI 1/ HDMI 2
Connect to the HDMI input on the
TV.
To Next Page
Loading...
