Philips TAB8967 - Main Unit Component Identification

9 EN
* Power cord quantity and plug type
vary by regions.
• Images, illustrations and drawings
shown on this User Manual are for
reference only, actual product may
vary in appearance.
• Please use HDMI cable with ferrite core
for this product.
Main unit
This section includes an overview of the
main unit.
0 0 :00
1
- (Volume) button
Decrease the volume.
2
+ (Volume) button
Increase the volume.
3
(Play/Pause) button
Start, pause or resume play.
4
(Source)/Bluetooth pairing
button
• Select an input source for the
Soundbar.
• Press and hold to activate the
pairing function in Bluetooth mode
or disconnect the existing paired
Bluetooth device.
5
(Standby-On) button
Power
State
Action Function
On • Follow source state
Semi
Standby
Press the
button
once
• Wi-Fi is still on.
• It still supports Airplay 2 and
Chromecast for Audio.
Eco
Standby
(Wi-Fi is
on)
Press and
hold
button 2
seconds.
Power LED
turns on.
• Wi-Fi is on.
• The product enters the
lower power consumption
mode.
• Restarting the system will
take a relatively longer time.
Eco
Standby
(Wi-Fi is
o)
Press the
button
once.
Power LED
turns on.
• Wi-Fiiso.
• The product enters the
lower power consumption
mode.
• Restarting the system will
take a relatively longer time.
6
Display panel
7
Remote Control Sensor
8
Power LED
9
Wi-Fi LED indicator (Yellow)
LED State Status
Blink Wi-Fi Access Point (AP) mode
Double blink Wi-Fi Protected Setup (WPS) mode
Constant on Connected / Pairing successful