Philips TAB8967 - Optimal Soundbar Placement; Wall Mounting Instructions

EN 14
Placement
Place the subwoofer at least 1 meter
(3 feet) away from your Soundbar, and
ten centimeters away from the wall.
For best results, place your subwoofer
and Surround R/L as shown below.
10cm/4”
1cm/3ft
110° 110°
Wall mount
Note
• Improper wall mounting may result in accident,
injury or damage. If you have any query, contact
Consumer Care in your country.
• Before wall mounting, make sure the wall can
support the weight of your Soundbar and
Surround R/L.
• Before wall mount, you need not remove the
rubber feet at the bottom of the Soundbar,
otherwisetherubberfeetcannotbexedback.
• Depending on the type of wall mounting your
Soundbar and Surround R/L, make sure that you
use screws of a suitable length and diameter.
• Please check whether the USB port on the back
of the Soundbar is connected to a USB device. If
itisfoundthattheconnectedUSBdeviceaects
the wall-mount, you need to use another USB
device of the appropriate size.
Screw length/diameter of Soundbar
> 25mm
3.5-4mm
4mm
> 25mm
Suggested wall mounting height of
Soundbar
(Self Tapping Screw ø4-32mm.)
You are recommended to install the TV
rstbeforewallmountingthesoundbar.
With a TV preinstalled, wall mount the
soundbar 50mm/2.0’’ in distance from
the bottom of the TV.
1 Drill 2 parallel holes (Ø 3-8mm each
according to wall type) on the wall.
» The distance between the holes
are:
• 1076mm / 42”