23 EN
4 Use your
Soundbar
This section helps you use the Soundbar
to play audio from connected devices.
Before you start
• Make the necessary connections
described in the quick start guide
and the user manual.
• Switch the Soundbar to the correct
source for other devices.
Turn ON and OFF
• Whenyourstconnecttheunitto
the main socket, the unit will be
in STANDBY mode. The STANDBY
indicator will light up white.
Power
State
Action Function
On
• Follow source state
Semi
Standby
Press the
button
once.
• Wi-Fi is still on.
• It still supports Airplay 2 and
Chromecast for Audio.
Eco
Standby
(Wi-Fi is
on)
Press the
button
once.
Power LED
turns on.
• Wi-Fi is on.
• The product enters the lower
power consumption mode.
• Restarting the system will take
a relatively longer time.
Eco
Standby
(Wi-Fi is
o)
Press and
hold
button 2
seconds.
Power LED
turns on.
• Wi-Fiiso.
• The product enters the lower
power consumption mode.
• Restarting the system will take
a relatively longer time.
Auto Standby
The unit automatically turns to Standby
mode after about 15 minutes if the TV or
the external unit is disconnected (or USB,
BT, Airplay 2 and Chromecast for Audio
function bit playback pause), switched
o.
• Toswitchtheunitocompletely,
remove the mains plug from the
mains socket.
• Pleaseturntheunitocompletelyto
save energy when not in use.
Select Modes
1 Press the button repeatedly on
the unit or on the remote control to
select the eARC/ARC, OPT, AUX, USB,
BT, HDMI 1, HDMI 2 mode.
» The selected mode will show on
the display.
» Airplay 2 and Chromecast for
Audio is not an optional source.
Need to be directly controlled by
APP.
Adjust the Volume
Adjust Soundbar, Subwoofer and
Surround R/L’s Volume
1 Press Vol+/Vol- (Volume) to increase
or decrease a volume level.
• To mute sound, press Mute.
• To restore the sound, press
Mute again or press Vol+/Vol-
(Volume).
While adjusting the volume of Soundbar,
the volume of Surround R/L and
Subwoofer will be adjusted at the same
time.
To Next Page
Loading...
