Philips VoiceTracer DVT2010 User Manual

12 VoiceTracer
Table of contents
3.4 Start-up screen
a ‹ Set recording quality: Œ–LP, Ž–SP, ‹–HQ, €–PCM
b Š – Voice activation switched on
c º Microphone sensitivity: ¹ – low sensitivity (shorter distance),
º – high sensitivity (longer distance), Ç – Line-in source
d Set repeat mode / continuous loop: Â–Repeat file playback,
Ã–Repeat selection/sequence, Á–Repeat folder playback,
Ä–Random repeat mode
e [ – Noise reduction on
f ¾ Battery charge level
g j S–Playback, {–Pause, j–Stop, g–Record, |–Pause
record
h Position indicator of current playback/recording
i Playback/recording time / Remaining recording time
j File name of current playback/recording
k u Selected folder, depending on the selected sttorage medium
(u–internal memory, i–microSD card)/ number of the
current recording / total number of recordings in the folder
Note
• The position of the symbols may vary, depending on the model,
the mode and the selected functions.

Philips VoiceTracer DVT2010 Specifications

General

Headphone outputs	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Compatible operating systems	Windows 10/8/7, macOS
Product color	Aluminium, Black
Sample rate	- kHz
Audio quality	- bit

Weight and Dimensions

Weight	55 g
Dimensions (WxDxH)	111 x 38 x 19 mm