19
First steps
Table of contents
Caution
• Do not disconnect the device from the computer while files are
transferred from or to the device (the status LED indicatorflashes
yellow when data is being transferred). This this may damage or
corrupt the files.
• Do not format the drive of the device on a computer. If you want
to delete all data, use the
Format memory function (see also
chapter 10.1.2 Memory formatting, page 37).
4.7.1 Transferring files from or to the device
You can use the File Explorer to access the device data without
installing additional software. The device is automatically displayed as a
mass storage device.
1
Connect the device to the computer as described.
2
Open File Explorer.
X The device is automatically displayed, similarly to a USB
memory stick or card, as a mass storage device. Use the Voice
folder for recordings and the Music folder for music files.
3
Copy or move files to your computer or delete files to archive
recordings and free up space on the device.
Caution
• Do not disconnect the device from the computer while files are
transferred from or to the device (the status LED indicatorflashes
yellow when data is being transferred). This this may damage or
corrupt the files.
• Do not format the drive of the device on a computer. If you want
to delete all data, use the
Format memory function (see also
chapter 10.1.2 Memory formatting, page 37).
Note
• The device supports music files in the formats WMA and MP3,
which can be transferred from the computer to the Music folder
of the device. The files are located in the y/ä folder on the
device.
• Files with copy protection (Digital Rights Management, DRM) are
not supported.
• The device can store up to 99 music files.
4.7.2 Disconnecting from a computer
1
Select Eject USB in File Explorer.
2
Disconnect the USB cable from the computer.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
