Philips VoiceTracer DVT2010 User Manual

35
Settings
Table of contents
13
Press b.
14
Press + / – to set the day.
15
Press the record key, g, to confirm.
16
Press + / – to select the Set time function.
17
Press the record key, g, to confirm.
18
Press + / – to set the hours.
19
Press b.
20
Press + / – to set the minutes.
21
Press the record key, g, to confirm.
22
Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
9.3.2 AUTO-OFF
The device switches o automatically if no key is pressed within a pre-
set period of time. This saves power.
1
In stop mode (start-up screen), press MENU.
2
Press h / b to select the device settings menu Õ.
3
Press + / – to select the Auto off function.
4
Press the record key, g, to confirm.
5
Press + / – to specify whether the device should turn o
automatically after
5, 15, 30 or 60 minutes' inactivity.
6
Press the record key, g, to confirm.
7
Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.

Philips VoiceTracer DVT2010 Specifications

General

Headphone outputs	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Compatible operating systems	Windows 10/8/7, macOS
Product color	Aluminium, Black
Sample rate	- kHz
Audio quality	- bit

Weight and Dimensions

Weight	55 g
Dimensions (WxDxH)	111 x 38 x 19 mm