15
3.6 Testing sound via the ComPilot
1. Wear the ComPilot correctly and
switch it ON.
2. Press and hold the Connect ( ) and
Main ( ) buttons simultaneously
for 2 seconds until the Audio indicator
turns violet.
The hearing aids will switch to the streaming mode
and you will hear the ComPilot theme sound demo for
30 seconds.
Use the Volume ( ) buttons to adjust the volume.
The volume level is permanently stored and will be
applied to all VoiceAlert messages.
If you cannot hear the demo sound:
J Make sure your hearing aids are inserted correctly.
J Make sure the ComPilot neckloop is properly plugged
in on both ends and worn around your neck.
J Make sure the ComPilot is charged and switched ON.
J Make sure you are not on a phone call connected
through the ComPilot.
To Next Page
Loading...
Need help?
General
