Phonak ComPilot User Manual

29
1. Type the number you want to dial on your phone,
or select it from the phone book.
2. Briey press the Connect ( ) button then wait
5 seconds.
3. The dialing process will automatically start and the
Audio indicator will turn solid blue. You may hear a
conrmation beep through your hearing aids.
5.4 Ending a call
To end a phone call via your ComPilot, briey press the
Main ( ) button. The call will terminate and your
hearing aids will return to the previously-active program
or audio source (such as the audio jack input).
You can also end a call by operating your phone
instead of your ComPilot.

Phonak ComPilot Specifications

General

Bluetooth	Yes
Battery Type	Rechargeable
Streaming Time	Up to 8 hours
Remote Control	Yes
Microphone	Yes
Neckloop	Yes
Operating Range	Up to 10 meters
Audio Input	3.5mm audio jack
Compatibility	Phonak hearing aids
Bluetooth Version	Bluetooth 2.1 + EDR
Supported Audio Sources	Bluetooth enabled devices, FM
Charging Time	Approximately 3 hours