Phonak ComPilot - Using ComPilot with Roger;FM

38
ComPilot can be used together with Roger or FM
receivers through its direct audio input (Europlug).
J Place the Roger / FM transmitter near
the sound source and turn it on.
J Attach your receiver to ComPilot
via the Europlug socket as shown
in the picture (turn receiver on if
required).
When a signal is detected, you
will hear a beep notication
through your hearing aids.
J Press main button to accept
the signal.
J Press main button again to
stop or resume the signal.
7. Using ComPilot with Roger / FM