Phonak ComPilot - Setting Up Bluetooth

56
8.6 Setting up Bluetooth
This section describes the pairing and connection
procedure for Bluetooth devices.
Step-by-step: pairing a Bluetooth-enabled phone
I It is only necessary to perform the pairing procedure
once with each Bluetooth device. The pairing
procedure is controlled by your phone.
I Dierent phones have dierent menu structures.
You should, therefore, refer to your phone’s user
guide or dealer support if you cannot complete the
pairing procedure with the generic steps described
here.
I A maximum of 8 devices can be paired to the
ComPilot. Another pairing will replace the device
that was not used for the longest period.
I The ComPilot can support (connect) two phones at
the same time but only one call at a time is possible.
For more information about Bluetooth pairing
instructions specic to some of the most popular
manufacturers, go to:
http://www.phonak.com/compilot
8. More detailed information