Phonak ComPilot User Manual

55
2. Connecting: Once a device is allowed to communicate
with the ComPilot (“paired”) the connection procedure
makes sure the devices can exchange audio signals.
The paired devices connect every time they are
switched ON and are within reach of each other.
This is indicated on the ComPilot by the blue blinking
Audio indicator.
Most Bluetooth devices perform the connection
procedure automatically after pairing.
On the following pages the pairing and the connecting
procedures are described.

Phonak ComPilot Specifications

General

Bluetooth	Yes
Battery Type	Rechargeable
Streaming Time	Up to 8 hours
Remote Control	Yes
Microphone	Yes
Neckloop	Yes
Operating Range	Up to 10 meters
Audio Input	3.5mm audio jack
Compatibility	Phonak hearing aids
Bluetooth Version	Bluetooth 2.1 + EDR
Supported Audio Sources	Bluetooth enabled devices, FM
Charging Time	Approximately 3 hours