Note: The laser AF assist light is safe with
optical power less than 5mW. However, avoid
pointing the light at human eyes.
Memory Function
Phottix Laso Transmitter supports memory
function. You can save the wireless settings and
recall the setting later.
1. Press function button 4 until
is
displayed.
2. Save or load the settings
Press function button 3 corresponding to
, and then press function button 1
corresponding to
, the settings are
saved (stored in the memory). Press function
button 2 corresponding to
, the
settings that were saved are set.
Clearing Transmitter Settings
You can return the settings for wireless
shooting to their default settings.
Press function button 2 and 3 simultaneously
for 2 seconds or longer, the Transmitter setting
are cleared and the shooting mode returns to
<
>ash mode. Note that even when the
settings are cleared, the transmission channel,
the wireless radio ID and the C.Fn and P.Fn
settings are not canceled.
To Next Page
Loading...
