Phottix Laso - Group Shooting Modes (Gr)

41
INSTRUCTION MANUAL
En
< > to set the number of ashes and press
<
>button;
Press function button 3 corresponding
to
, turn < > to set the flash
frequency and press <
>button.
Note:
1) High speed sync function is not available
when using stroboscopic ash.
2) Phottix Laso Receiver does not support
MULTI mode.
Gr: Shooting with a Dierent
Flash Mode for Each Group
When using an EOS digital camera released
since 2012, you can shoot with a dierent ash
mode set for each ring group, with up to 5
groups(A/B/C/D/E).
The ash modes that can be set are E-TTL II/
E-TTL autoash,
Manual ash and Auto
external ash metering. When the ash mode
is
or , exposure is controlled to result
in standard exposure for the main subject as
a single group. The function is for advanced
users.
1. Set the ash mode to <
>
Press < > button on master unit to set
the ash mode to < >.
2. Set the ring group on the slave units
Operate and set the slave units one by one,
and set a firing group (A/B/C/D/E) for all