III. LCD Display
Phottix Laso Transmitter’s LCD display comes
with ve modes: ETTL, M, MULTI, Gr and
LINKED SHOT. You can cycle through “ETTL, M,
MULTI, Gr” by pressing < > button. And
by pressing and holding < >button, you
can switch the LCD to display LINKED SHOT.
Dierent display settings come to perform
dierent ash modes. Find details about the
ve ash modes as following:
Memory function
Save the present setting
Load the settings that were saved
Back to shooting-ready state
8
9
10
11
12
Sync mode
Firing group
Multi stroboscopic
flash frequency
Multi stroboscopic
flash number
No display
1~500Hz
1~100times, based on the frequency and flash output
Up to 5 firing groups A、B、C、D、E（at Gr mode）
Enable High Speed Sync
First Curtain Sync
To Next Page
Loading...
