40
MULTI: Stroboscopic Flash
Stroboscopic flash is an advanced manual flash
shooting method. When using stroboscopic flash
with a slow shutter speed, you can shoot multiple
successive movements within a single picture,
similar to stop-motion pictures. In stroboscopic
flash, set the flash output, number of flashes, and
ash frequency (number of ashes per second = HZ).
1. Press master unit’s < >button to set
the ash mode to< >.
2. Set the number of ring groups and ash
output for each group by referring to manual
ash on the preceding page.
3. Set the flash frequency and number of
ashes:
When
is displayed, press function
button 2 corresponding to , turn
To Next Page
Loading...
