< > lamp of slave unit briey lights
orange.
7. Press function button 1 corresponding to
on master unit will release the shutter
of all slave unit cameras.
Noted:
1.When using the linked shooting function,
the slave unit camera might need a
shutter release cable(available separately)
depending on the camera models.
1) EOS digital cameras since 2012
(excluding EOS 1200D) do not need to
use shutter release cable.
2) EOS cameras before 2012, which are
compatible with E-TTL II/E-TTL autoash
and come with N3 type remote
terminal EOS, shutter release cable will
be needed for linked shooting.
2. Shooting with manual focus is
recommended for the slave unit cameras. If
focus cannot be achieved with autofocus,
linked shooting is not possible with the
corresponding slave unit cameras.
V. Setting Transmitter
Functions with Camera
Operations
When using EOS digital camera released
since 2007, you can set ash functions,
Transmitter functions or Custom Functions
from the camera’s menu screen. For the camera
To Next Page
Loading...
