38
Simply set an additional slave unit to the
ring group (A, B or C)whose ash output
you want to increase. You can increase the
number of slave units up to 15 units in
total.
For example, if you set a ring group with
three slave units to A, the three units are
controlled as a single ring group A with a
large ash output.
M: Wireless Multiple Flash Shooting
with Manual Flash Output
When doing multiple flash shooting with
manual flash output, you can shoot with a
dierent ash output setting for each slave unit
(firing group). Set all the parameters on the
master unit.
To Next Page
Loading...
