Phottix Laso - ETTL: Wireless Multiple Flash Shooting with Flash Ratio

33
INSTRUCTION MANUAL
En
3.1 Press function button 4 until is
displayed.
3.2 Press function button 2 corresponding
to
, will be displayed on the
screen.
3.3 Press function button 2 will disable
.
4. FEL: FE Lock
FE (Flash Exposure) lock locks the correct ash
exposure setting for any part of the scene.
Perform FE lock by operating the camera.
For the operation, see the camera and ash’s
instruction manual.
5. About Master Units
You can use two or more master units (master
units + slave units = maximum of 16 units). By
preparing multiple cameras with master units
attached, you can shoot by changing cameras
while keeping the same lighting (slave units).
Note that when using two or more master
units, the color of the <
> lamp varies
depending on the order in which the power
was turned on. The rst master (main master)
is green and the second subsequent masters
(sub masters) are orange.
ETTL: Wireless Multiple Flash
Shooting with Flash Ratio
1. Autoash shooting with Two Slave Groups
You can divide the slave units into two
ring groups A and B, and adjust the