Thank you for purchasing a Phottix
Product
Note: Before using the Phottix Laso TTL Flash
Trigger for Canon, please read this instruction
manual carefully, while also referring to the
instruction manuals of your camera, ash and
other relevant devices.
Phottix Laso Wireless Trigger for
Canon Transmitter
The Phottix Laso Transmitter is used for wireless
ash shooting. It can control up to 5 groups (15
units) of radio-enabled Canon Speedlites, as
well as non-wireless Canon ETTL Speedlites by
using the Phottix Laso Receiver. The Transmitter
supports multiple ash modes and shooting
approaches including E-TTL II/E-TTL, Manual,
MULTI, Ext.A and Linked Shooting.
Warnings
1. This product is a precise electronic
instrument. Do not expose to damp
environments or dust.
2. Please shut down the power of all devices
when installing the wireless trigger.
3. Do not drop or crush.
4. Do not use the wireless trigger in ammable,
explosive or high temperature environments.
5. Do not use harsh chemicals or solvents to
clean the body. Use a soft cloth or lens paper.
To Next Page
Loading...
